Aquacraft VS1 User Manual download pdf (Page 12)

INSTALLING THE THROTTLE CABLE

Parts and tools you are going to need:

Outer white sheath (VS1 Kit)

Inner metal cable (VS1 Kit)

Four metal clevises (VS1 Kit)

Four threaded couplers (VS1 Kit)

Four 1/4" lengths of fuel line (VS1 Kit)

1/2" length of fuel line (VS1 Kit)

Two zip ties (VS1 Kit)

Rotary tool with cut off wheel

Soldering iron

Solder

Side cutters

Small Phillips screwdriver

1. Using a pair of side cutters prepare the throttle servo horn

by clipping away three of the four protrusions. I like to keep

things neat so I sand away any sharp edges that the side

cutters leave.

2. Cut the outer white sheath to 16" long. Slip the 1/2" length

of fuel tubing onto the large protruding barrel of the output.

Then, slide the white sheath inside the output. Secure the

white sheath to the output by using the two provided zip ties.

3. Insert the other end of the white sheath into the cable

clamp that comes with your motor and tighten.

4. Solder the metal clevis to one end of the steel cable;

slide the cable into the outer sheath from the radio box side.

Attach the metal clevis to the servo horn and position the

horn parallel with the servo.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 18 19 20

No comments

Aquacraft VS1 User Manual Page 12