Aquacraft Reef Racer 2 User Manual download pdf (Page 4)

❏ 5. The canopy is held to the deck of the Reef Racer 2 with

hook & loop material. Open the battery compartment of the Reef

Racer 2 by gently lifting the canopy as shown.

❏ 6. Each hatch lid is held in place by tabs. Twist the forward

lid until the tabs line up with the slots and gently lift the lid

from the deck as shown.

❏ 7. Plug the battery pack into the boat’s battery connector.

Do not force them together; they are designed to fit together

only one way. Place the battery pack in the battery tray with

the provided hook & loop material as shown.

❏ 8. Replace the forward hatch lid with the tabs lined up

with the slots and give it a twist to lock it in place.

CHECK OPERATION:

❏ 1. Turn the power “ON” to the transmitter and then the boat

(in that order). Place the canopy on top of the Reef Racer 2 hull

and make sure that the hook & loop material attach securely.

❏ 2. Standing behind the boat with both the Reef Racer 2 and

transmitter “ON”, rotate the wheel to the left. The back of the

rudder should move towards the left. Move the wheel to the

right. The back of the rudder should move towards the right.

❏ 3. Squeeze the trigger on the transmitter, the propeller

should turn in a counter-clockwise motion.

❏ 4. Turn the power “OFF” to your boat and then

your transmitter.

• NEVER attempt to swim after a stalled or capsized boat!

Wait patiently for the wind currents to return the boat to

shore or use a tennis ball attached to the end of a fishing

rod to retrieveit.

• It is dangerous to operate any R/C vehicle at any time that

there is insufficient light.

PLEASE READ BEFORE RUNNING

THE REEF RACER 2

1 2 3 4 5 6 7 8

No comments

Aquacraft Reef Racer 2 User Manual Page 4