Aquacraft SuperVee 27R User Manual download pdf (Page 6)

MOTOR MAINTENANCE

After each day of operation we feel it’s best to remove the motor,

ﬂ ush it out with a moisture displacer and re-oil the bearings. You

are going to need the following tools and supplies.

12mm open end wrench

10mm open end wrench

1.5mm hex wrench

2.5mm hex wrench

Pliers

Wa ter displacer (WD-40,

CRC-56 or Corrosion X)

Bearing oil

Paper towel

Start by removing the radio box. Taking the box out is not

necessary but it does make this procedure a lot easier to do:

1. Use a set of pliers to detach the ball link off of

the tiller arm. Just rotate it and it will pop off.

2. Unscrew the ball link, counting

the turns as you remove it.

3. Pull the water pickup line off of the

transom mounted water pickup.

1 2 3 4 5 6 7 8 9 10 11 ... 15 16

No comments

Aquacraft SuperVee 27R User Manual Page 6